Asphalt Modifiers Market - Forecast(2024 - 2030)

Asphalt modifiers market size is forecast to reach US$4.8 billion by 2026, after growing at a CAGR of 5.7% during 2021-2026. This growth is attributed to the accelerating demand of adhesion promoters, flux oil, crumb rubber, polyurethane resin, and phenolic resin based asphalt modifiers from the boosting infrastructure sector due to its rigid properties. In addition, the increased use of asphalt modifiers in roofing applications is also expected to drive the need for asphalt modifiers during the forecast period.  Increased use of the bio asphalt mixture and concrete as a replacement, however, is expected to impede the development of the demand for adhesion promoters, flux oil, crumb rubber, polyurethane resin, and phenolic resin based asphalt modifiers. Similarly, the production and commercialization of environmentally friendly recyclable asphalt could provide market players with a lucrative opportunity.

Supply lines were disrupted, and building and construction projects were delayed all across the world as a result of the COVID-19 pandemic. Most countries enacted stringent lockdowns and curfews to prevent the spread of the coronavirus. Due to a scarcity of raw materials, labor, and government regulations that compelled ongoing projects to be suspended, this resulted in an economic depression, with construction being one of the hardest-hit sectors. While, in the third quarter of 2020, several local governments took steps to restart road, highway, and building construction projects. After April 2020, Germany's Federal Ministry of Transport and Digital Infrastructure (BMVI) have resumed building and road construction. Since the second half of 2020, countries such as Romania and India have resumed highway and road building. Although other infrastructure sectors were hit hard by the pandemic, the highway sector had a stellar year in 2020-21. A total of 13,298 km of highways were constructed in the fiscal year, compared to around 10,240 km in FY20, a 30 percent rise year over year and a speed of 36.4 km/day. As a result, when compared to the previous year, the construction sector is projected to expand rapidly in 2021.

The report: “Asphalt Modifiers Market – Forecast (2021-2026)”, by IndustryARC, covers an in-depth analysis of the following segments of the Asphalt Modifiers market.

By Asphalt Type: Cold Mix Asphalt, Half Warm Asphalt, Warm Mix Asphalt, and Hot Mix Asphalt

By Modifier Type: Polymeric Modifiers (Polyurethane Resin, Phenolic Resin, Low Density Polyethylene (LDPE), Ethylene Vinyl Acetate (EVA), and Others), Adhesion Promoters, Rejuvenators, Chemical Modifiers, Flux Oil, Crumb Rubber, Colored Asphalt, and Others.

By Application: Roofing (Residential, Commercial, and Industrial), Road Construction (Expressways, Highways, Airport Runways, Local Streets, and Others), Paving, Parking Areas, and others.

By Geography: North America (USA, Canada, and Mexico), Europe (UK, Germany, Italy, France, Spain, Russia, Netherlands, Belgium, and Rest of Europe), APAC (China, India, Japan, South Korea, Australia and New Zealand, Indonesia, Taiwan, Malaysia, and Rest of APAC), South America (Brazil, Argentina, Colombia, Chile, and Rest of South America), and Rest of the World (Middle East and Africa).

The warm mix asphalt segment held a significant share in the asphalt modifiers market in 2020 and is growing at a CAGR of 6.1% during 2021-2026. Due to growing concern about environmental issues such as global warming and carbon footprint, the asphalt industry's incentive to minimize greenhouse gas emissions has increased. This has prompted the development of Warm Mix Asphalt (WMA) and related technologies, which aim to reduce greenhouse gas emissions by lowering asphalt mix mixing and compaction temperatures. WMA has grown in favour as a result of the environmental benefits it provides without sacrificing the asphalt mix's qualities, performance, or quality. WMA is made at much lower temperatures (just around 100°C), resulting in decreased energy usage, fewer emissions, reduced ageing, lower mixing and compaction temperatures, cold weather paving, and improved mix workability. The introduction of chemicals into WMA is responsible for the latter of these advantages. In comparison to traditional Hot Mix Asphalt (HMA) processes, WMA perform better, owing to which it is seeing a significant increase in its demand.

The polymeric modifier segment held the largest share in the asphalt modifiers market in 2020 and is growing at a CAGR of 6.1% during 2021-2026. To increase the flexibility and longevity of asphalt pavements, polymeric modifiers are used across the world. They are simple to use, and the raw materials used to manufacture them are readily available, making them the most common source of asphalt additives in the world. Polymeric modifiers are used to improve the high temperature (rutting) properties of modified materials. Low-density polyethylene (LDPE) and ethylene-vinyl acetate (EVA) are examples of polymeric modifiers used in asphalt modification.  Although polymer modification seems to be the best solution to improve asphalt properties, these systems present three main problems such as poor asphalt polymer compatibility (which influences the stability of the system), higher viscosities during asphalt processing and application, and higher cost, which is restricting the market growth.

The road construction segment held the largest share in the asphalt modifiers market in 2020 and is growing at a CAGR of 8.6% during 2021-2026. To improve the durability of road construction, modifiers such as adhesion promoters, flux oil, crumb rubber, polyurethane resin, and phenolic resin are used to increase resistance to pavement discomfort, such as thermal cracking, rutting, stripping, and more, thus prolonging the service life. The global market for asphalt modifiers has experienced above-normal growth in recent years. The incremental improvements in the consumption of mobility and transport are expected to be experienced over the coming decades. It is projected that annual air traffic will reach 80 trillion passenger-kilometers by 2030. Global volumes of freight are likely to rise by 70%, and an extra 1.2 billion vehicles are predicted to be on the road by 2050. Therefore, the enhancement of the road transport network and the upgrading of highway maintenance operations are projected to take place during the forecast timeframe to satisfy the additional demand, thus increasing the demand for asphalt modifiers.

Asia-Pacific region held the largest share of more than 40% in the asphalt modifiers market in 2020 and is growing at a CAGR of 6.4% during 2021-2026, because of the central government's drive for infrastructure spending as a way of maintaining economic development; the road and highway construction industry has grown rapidly.  The Asia-Pacific government's substantial expansion of road infrastructure to withstand the expanding manufacturing and service sectors has contributed to significant growth in the road construction sector in recent years. In February 2019, In Himachal Pradesh, the Union Minister for Road Transport and Highways laid the foundation stones for seven National Highway projects worth Rs 4,419 crore (US$627.5 million). In July 2020, the government launched an Rs10000 crore (US$1,350 million) trans-Haryana project, which is a six-lane 304-km project from Ambala to Ismailabad to Kotputali. It is a greenfield project and is expected to be completed by December 2022. Several new road projects are being planned in China’s Yunnan Province and Guizhou Province. A new expressway will connect Chengjiang and Huaning, featuring a design speed of 100km/h. The 63.3km expressway project will cost an estimated US$1.86 billion. Thus, it is expected that such investment and growth will drive the demand for asphalt modifiers in the Asia-Pacific region.

In the developing region, road building and growth activities are projected to increase significantly. The demand for adhesion promoters, flux oil, crumb rubber, polyurethane resin, and phenolic resin based asphalt additives in these nations is projected to be driven by increasing road and highway building activities. The increase in expenditure on infrastructure in various countries can be attributed to the increasing construction of roads and highways for improved transportation and enhanced connectivity between important economic centers in these countries. For instance, according to India Brand Equity Foundation, the infrastructure sector has become one of the major focus areas for the Indian government. In the Union Budget 2020-21, the Indian government announced US$13.1 billion for road and highway construction. In March 2021, the project to rebuild an important road stretch has been awarded in Spain. The package of works is worth €244 million (US$293.8 million) and is for a 70km section of the A4 highway. In May 2021, Brazil announced a major new highway deal. Improvements to the route are expected to total US$1.42 billion.  It is estimated that new road projects will strengthen the road network in both urban and rural areas, which would fuel the demand for asphalt modifiers. 

Asphalt modifiers based on adhesion promoters, flux oil, crumb rubber, polyurethane resin, and phenolic resin are mainly used for waterproofing in roofing applications. It's also used in asphalt-saturated felts, roll roofing, and shingles as a saturate. Asphalt shingles are one of the least expensive roofing applications and are witnessing increased demand from the residential as well as commercial sector. In the UK government’s strategic plan 2018/19 – 2022/23, the government aims to deliver 300 homes, begin construction on 1,000 town center apartments, and launch phase three at Northstowe by 2022/23. By 2030, 40 hospitals will be constructed as part of a £3.7 billion (US44.7 billion) package, according to the European government. In addition, 20 hospitals will receive a share of £850 million (US$1.1 billion) to update obsolete facilities and equipment, with enabling work already underway at many sites. Increasing government investments for the construction and renovation of the residential and commercial sectors is expected to driving the demand for building materials. And as the market for building materials is increasing in various regions, the use of asphalt in these materials is expected to grow. As a result, demand for asphalt additives is expected to grow as these extend the life and longevity of asphalt in roofing applications.

Recent issues of over-use or misuse of some of these new chemistries have surprised the marketplace and produced many exciting and beneficial chemistries with caution and cynicism. Today, it is difficult for asphalt consumers needing assistance with chemical additives to select between distributor commitments and industry rumors of early road deficiencies that could be more due to the absence of discipline in the use of one or more of the multiple chemistries of modifiers. Thus, the use of asphalt modifiers, extensors, and diluents has greatly magnified the difficulty of designing a cost-effective and efficient formulation for a paving or roofing application, further compounding the complexities of handling changing asphalt consistency also pose a major problem for the asphalt modifiers industry. 

Technology launches, acquisitions, and R&D activities are key strategies adopted by players in the Asphalt Modifiers Market. Major players in the Asphalt Modifiers Market are Arrmaz, Arkema SA, BASF Corporation, Honeywell International Inc., Huntsman Corporation, Kao Corporation, Ingevity Corporation, Kraton Corporation, Nouryon, Dupont De Nemours Inc., and Sasol Limited.